Screen displays (continued)

21Focus control display

Displays the focus control information with 99-00.

In the auto focus mode, AF appears. In the manual focus mode, MF appears, and when MF ASSIST is set to ON on the setting menu SW MODE screen, MA appears. When the display is set to macro control, the black and white of AF or MF are displayed in reverse.

95 (Distance to the subject: infinity)

 :

00 (Distance to the subject: approx. 5 cm)

Depending on the zoom position, the macro range may not be enabled. Also, depending on the zoom position, the lower limit value of macro range may be different.

The units can be switched between feet and m in the ZOOM•FOCUS option of the setting menu DISPLAY SETUP screen.

22TEXT MEMO and SHOT MARK display This display lights when the USER button to which the TEXT MEMO function has already been allocated is pressed while recording or playback and the text memo is recorded.

MARK ON appears when the USER button to which the SHOT MARK function has already been allocated is pressed while recording and a shot mark is added to the clip being recorded. Pressing the USER button again deletes the shot mark, and MARK OFF appears.

INVALID appears when text memo could not be recorded, or when a shot mark could not be added or deleted.

23Recommended ND filter

The recommended ND filter under the current shooting conditions is displayed here.

24ND filter display

ND filter selected is displayed.

25Gain display

In CAM mode, displays the gain value of the image amplifier configured. (During the auto mode, AGC is displayed.)

Only in the 576i DV format, the gain value during shooting is also displayed during playback when ON was selected under CAMERA DATA of the setting menu DISPLAY SETUP screen.

26AWB operation display

The white balance operation is indicated here.

27AWB information display

Displays the information of white balance. ATW: When ATW is set P3.2K/P5.6K: In the case of preset Ach/Bch: In the case of A/B

LOCK: When ATW is locked

28Digital zoom display Shows the digital zoom ratio.

D 2X: 2x

D 5X: 5x

D 10X: 10x

29Displays marker

During shooting, pressing the ZEBRA button once or twice will display the marker.

30Optical Image Stabilizer (  ) display

In CAM mode, appears when images were shot in the optical image stabilization mode.

Only in the 576i DV format, also appears in playback mode when ON was selected under CAMERA DATA of the setting menu DISPLAY SETUP screen and images were shot in the optical image stabilization mode.

31Scene file name display (in CAM mode)

(Page 52)

32Remaining battery charge

As the remaining battery charge drops, the

display changes as follows:

When the battery has completely discharged,

(  ) blinks.

(When the AC adapter is being used, a display

other than may appear: this is not a sign of malfunctioning.)

33Media remaining memory display Displays the remaining time.

In P2 CARD REMAIN on the setting menu DISPLAY SETUP screen, select TOTAL to display total remaining time for all inserted cards or ONE-CARD (highlighted) to display the time remaining only on the card selected for recording. During MODE CHECK, it is possible to confirm the remaining time for the setting not selected in the menu.

No indication is made while the remaining time is being calculated.

An ongoing loop recording is indicated as “LOOP” and in MODE CHECK, the standard recording time appears after loop recording ends.

The remaining time indication starts to flash when a total of less than 2 minutes remains.

88