Connect the DC cord to the AC adapter.

Installing and removing the power supply

Installing and removing the battery Installation

1 Insert the battery until it clicks into place.

Removal

1 Set the POWER switch to OFF, and check that the mode lamp is off.

2 While pressing the battery release button, raise up the battery to remove it.

•Support the battery with your hand to ensure that it will not fall.

Mode lamp

Preparation

Battery release button

Connecting and disconnecting the power cord

Installation

1

2 Plug the AC power supply cord into the power outlet.

3 Slide the DC cord’s battery connector to the direction of the arrow until it clicks into place.

DC cord’s battery connector

Removal

1 Set the POWER switch to OFF, and check that the mode lamp is off.

2 Slide the DC cord’s battery connector to the direction of the arrow while pressing the battery release button.

Battery release button

3 Disconnect the AC power supply cord from the power outlet.

CAUTION:

•You cannot charge the battery when supplying power to the camera-recorder from the AC adapter.

•Disconnect the AC power supply cord from the power outlet when the unit is not going to be used.

15