Appendix
Selecting the USER CLIP NAME recording method
Press the MENU button and select META DATA
PROPERTY USER CLIP NAMEto select the recording method. Two options are available: TYPE1and TYPE2.
TYPE1
| USER CLIP NAME to | |
| be recorded | |
If clip metadata has | Uploaded data | |
been read in | ||
| ||
If no clip metadata |
| |
has been read in |
| |
or if the setting | Same as GLOBAL | |
for recording clip | CLIP ID (UMID data) | |
metadata has been |
| |
turned off |
| |
TYPE2 |
| |
|
| |
| USER CLIP NAME to | |
| be recorded | |
If clip metadata has | Uploaded data + | |
been read in | COUNT value* | |
If no clip metadata |
| |
has been read in |
| |
or if the setting | Same as CLIP NAME | |
for recording clip | ||
| ||
metadata has been |
| |
turned off |
|
*The COUNT value is indicated as a
The COUNT value is incremented each time a new clip is captured if clip metadata has been read in and TYPE2 has been selected as the recording method.
The COUNT value can be reset using the following procedure.
Press the MENU button and select META DATA
PROPERTY USER CLIP NAME to display the menu shown below. Select “COUNT RESET” with the cursor and press the Operation lever to reset the COUNT value to 1.
When a P2 card with a memory capacity of 8 GB or more is used in this unit and a
20 minutes for DVCPRO or DV) or when a onetime recording extends over more than one P2 card, the recording concerned will automatically be undertaken as a separate clip.
At this time, each clip will be provided with its own COUNT value.
Example of recording (DVCPRO50) a clip on one P2 card:
REC start |
| REC/PAUSE | |||||
(recording start) |
| (recording pause) | |||||
|
| Recording duration = Approx. 15 min. | |||||
|
|
|
|
|
|
|
|
|
| Clip 1 |
| Clip 2 |
| ||
| COUNT value = 0001 | COUNT value = 0002 |
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
| 10 min. |
| 5 min. |
Example of recording a clip on two P2 cards:
REC start |
| REC/PAUSE | |||||
(recording start) |
| (recording pause) | |||||
|
|
|
|
|
|
|
|
|
| Clip 1 |
| Clip 2 |
| ||
| COUNT value = 0003 | COUNT value = 0004 |
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
| 1st card |
| 2nd card |
If the clip thumbnails are displayed as shown in the example above or their properties are indicated using a P2 device, the thumbnail and COUNT value of clip 1 will be displayed.
124