6 Press the MENU button four times to cancel the menu mode.
To load a file
1)Perform steps 1 to 3, select READ in step 4 and push the Operation lever.
When reading is completed, READ OK appears.
To title a file
1)Perform steps 1 to 4.
2)Push the Operation lever in the E or R direction to select a character, then push it in the Q direction to move to the next character. (The next character can now be selected.)
•You can input any of the following characters: Space, A to Z, 0 to 9, : ; < = > ? @ [ \ ]
•You can erase all characters using the RESET button on the camera or the remote
control.
BARS | SHUTTER | SPEES SELECT |
|
|
|
| |
CH1 SELECT CH2 SELECT | INPUT1 | INPUT2 |
|
|
| START/ | |
INT(L) | INT(R) | ON | ON |
| DATE/ | PHOTO | STOP |
INPUT1 | INPUT2 | OFF | OFF | OSD | TIME | SHOT |
|
INPUT2 |
| MIC POWER+48V |
|
|
|
| |
| AUDIO |
|
|
|
| ||
| ZEBRAREC OIS | COUNTER | RESET | TITLE | ZOOM | ||
COUNTER | RESET/TC SET |
|
|
| |||
|
|
|
| MULTI/ | REC | A.DUB |
|
|
|
|
| + | |||
LCD |
| EVF DTL | WFM |
|
|
| - VOL |
| /REW | PLAY | FF/ |
| |||
Camera or Remote control
3)When all characters have been entered, push the Operation lever in the W direction at the left end (or in Q direction at the right end) of the characters. Then press the Operation lever .
To reload a file from an SD memory card
1)Perform steps 1 and 2.
2)Push the Operation lever in the E or R direction to move to TITLE RELOAD, display YES and press it again.
The file reloads.
•If WRITE NG FORMAT ERROR appears, format the SD memory card. (Page 28)
•If WRITE NG WRITE PROTECT appears, release the protected status of the SD memory card.
•If WRITE NG CANNOT ACCESS appears, quit all other operations (such as playback) before proceeding.
•If WRITE NG ERROR appears, the SD memory card may be defective. Replace it.
Shooting
55