INPUT 2:

Audio from a device connected to INPUT 2 terminal is recorded to channel 1.

5 Use the CH2 SELECT switch to select the input signal to be recorded to audio channel 2.

INT (R):

Audio from the built-in microphone Rch is recorded to audio channel 2.

INPUT 2:

Audio from a device connected to INPUT 2 terminal is recorded to channel 2.

•When inputting the microphone signal to channels 1 and 2, connect the microphone to INPUT 2 and switch both CH1 SELECT and CH2 SELECT to INPUT 2.

Adjusting the recording level

AUDIO LEVEL knob

 

 

Use the AUDIO LEVEL knob to adjust the

 

 

recording level of the built-in microphone or of

 

audio signals input through the INPUT 1/2 (XLR

 

3-pin) terminal.

 

Shooting

To adjust the recording level of the audio signals,

To adjust the volume of the sound for monitoring.

 

(Page 42)

 

 

turn the AUDIO LEVEL knob while referring

 

 

to the audio level meter at the bottom left of

 

 

the viewfinder and LCD monitor, regardless of

 

the MIC ALC option setting (Page 103) on the

 

RECORDING SETUP screen of the setting menu.

 

-18 dB -12 dB

0 dB

 

CH1

CH2

•The CH1 and CH2 characters are highlighted (they will appear in black text) when INT MIC on the AV IN/OUT SETUP screen is set to OFF.

 

HC1

 

HC1

 

HC2

 

HC2

INT MIC ON

INT MIC OFF

Check the recording level prior to shooting.

•The recording level is set higher than for Panasonic’s broadcast-use camera recorders (AJ series).

51