Checking photos taken (REC CHECK)
In the shooting pause mode, press the REC CHECK button.
This plays back about 2 seconds of the video and audio of the most recently recorded clip before returning to pause mode.
•Note that this REC CHECK portion will also be recorded to any equipment you have set up to make backup recordings.
•The REC CHECK function does not work in PC and MCR mode.
The HD recording(1080i/50i) settings are already made in the default mode. (To view the current settings, see Page 40.)
P2 card access lamps
CAM mode (MCR)
Lights green:
Data can be saved onto the cards or loaded from them.
Blinks green (slow):
No available space on card, card is write- protected
Lights orange:
Slot that is the object of recording
Blinks orange:
Data is now being accessed.
Blinks orange (fast):
A card is now being recognized.
Both lamps blink orange:
Ejection of card during access
Off:
Cards have not been inserted or formatted. Insertion of incompatible card.
PC mode (USB DEVICE)
Blinks orange: Data is now being accessed.
Off: A status other than access underway.
PC mode (1394 DEVICE)
Blinks orange: Connected
Off: Not connected
PC mode (1394 HOST)
Lights green:
Access standby.
Blinks orange:
Data is now being accessed.
Off:
Cards have not been inserted or formatted. Insertion of incompatible card.
P2 card access lamp | Shooting | |
| ||
Protecting against a possible erasure | ||
|
Switch the
Formatting P2 cards
1
2 Press the mode button and set it to MCR mode (the MCR lamp lights).
• Thumbnails are displayed.
(Continued on the next page)
25