Screen displays (continued)
Warnings
COPY INHIBITED
Can not record correctly because of the input signal
EXTERNAL1394 DISCONNECT
When the 1394 CONTROL item of the OTHER FUNCTIONS screen of the Setup menu is set to EXT and recording without connecting external units with 1394 terminal, this display appears.
INCOMPATIBLE CARD
The card cannot be used since it does not comply with the specified standard.
RUN DOWN CARD
The maximum number of overwrites on the P2 card has been exceeded.
Operation continues. However, recording or playback may not operate correctly. It is recommended that you replace the P2 card with another one.
DIR ENTRY NG CARD
The directory structure on the P2 card is not supported.
Operation continues. However, recording or playback may not operate correctly.
The P2 card cannot be used for the special recording functions (interval recording,
Back up data on the P2 card as soon as possible, and format the card before using it again.
FORMAT ERR !
This card is not compliant with the P2 standard.
LOW BATTERY
No operations can be performed since the battery charge is low.
<Thumbnail operations>
CANNOT ACCESS
Cannot access clips.
CANNOT DELETE
Cannot delete clips.
CANNOT FORMAT
Cannot format P2 cards or SD memory cards.
CANNOT REPAIR Cannot repair clips.
CARD FULL
The P2 card does not have enough free space for recording.
WRITE PROTECTED
The P2 card or SD memory card is writeprotected.
NO CARD
A P2 card or SD memory card has not been inserted.
NO FILE
There are no files (version upgrade files, etc.).
Errors
These are displayed when an error occurs in the unit, P2 card, or other component. If the problem is not fixed by turning the power off and then on again, either replace the card based on the error information, or consult with your dealer as to which one is to be purchased.
CANNOT PLAY
This is displayed when trouble has occurred during playback.
CARD ERR (1) (2) (1/2)
(Trouble has occurred in the P2 card found in the slot indicated by the number.)
CLIP ERROR (clip trouble) UPDATING (clip recording) ERROR (other type of trouble)
SYSTEM ERROR
This is displayed when trouble has occurred in the system. Switch ON the power again.
P2 MICON ERROR (no P2 microcomputer response)
P2 CONTROL ERROR (trouble in P2 control) REC RAM OVERFLOW (recording RAM
overflow)
TURN POWER OFF
This display appears when an abnormality occurs as a result of the card being pulled out while data is being accessed.
REC WARNING
This is displayed when trouble has occurred during recording. Carry out recording once again. If the warning persists, consult your dealer.
CARD ERR (1) (2) (1/2)
(Trouble has occurred in the P2 card found in the slot indicated by the number.)
•If the warning continues, turn off the power.
•If the warning appears even when recording is carried out again, replace the card with another one.
ERROR (other type of trouble)
90