Panasonic AG-HPX172EN manual 53

6 When the screen shown below appears,

use the Operation lever to enter a 6- character file name.

Set the same as user information. (Page 60)

•Characters that can be set

Space, A to Z, 0 to 9, : ; < = > ? @ [ \ ] ^_-./

When the filename has been set, you can erase all characters using the RESET button

on the camera or the remote control.

BARS	SHUTTER	SPEES SELECT
CH1 SELECT CH2 SELECT		INPUT1	INPUT2				START/
INT(L)	INT(R)	ON	ON		DATE/	PHOTO	STOP
INPUT1	INPUT2	OFF	OFF	OSD	TIME	SHOT
INPUT2		MIC POWER+48V
	AUDIO
		ZEBRAREC OIS		COUNTER	RESET	TITLE	ZOOM
COUNTER	RESET/TC SET
				MULTI/	REC	A.DUB
				P-IN-P			+
LCD		EVF DTL	WFM				- VOL
				/REW	PLAY	FF/

Camera or Remote control

NAME EDIT

SW POSITION F1

+/– : PUSH Q / G

SEL : PUSH T / Y

PUSH MENU TO RETURN

7 After you finish setting the filename, press

the MENU button.

8 Push the Operation lever in the R direction

to select LOAD/SAVE/INIT.

	SCENE FILE F1:
		––––
LOAD/SAVE/INIT
OPERATION TYPE		VIDEO CAM
FRAME RATE		DEFAULT
SYNCRO SCAN		1/48.0
DETAIL LEVEL		0
V DETAIL LEVEL		0
DETAIL CORING		0
CHROMA LEVEL		0

PUSH MENU TO RETURN

9 Press the Operation lever, push it in the R direction to select SAVE and press it again.

SCENE FILE F1:

LOAD/SAVE/INIT	––––
OPERATION TYPE	LOAD
FRAME RATE
	SAVE
SYNCRO SCAN	INITIAL
DETAIL LEVEL	0
V DETAIL LEVEL	0
DETAIL CORING	0
CHROMA LEVEL	0

PUSH MENU TO RETURN

10 Press the Operation lever to select YES

when the screen shown below appears. (To return to the menu level above, press the MENU button.)

SCENE FILE F1:

SAVE?

YES –––PUSH STILL

NO

PUSH MENU TO RETURN

The message below appears, and the changes to the scene file are complete.

SAVE

PROCESSING...

		Shooting
	SAVE
	COMPLETED !
11 Press MENU twice to exit the menus.

•To return to a previously saved setting after a change in scene file settings, select LOAD in step

9 and do steps 10 and 11.

•To return the scene file settings to the factory settings, select INITIAL in step 9, then do steps 10 to 11.

53