Panasonic AJ-D850P manual Specifications, Other input/output connector

Specifications

GENERAL

	Power supply:	AC 120 V, 50 – 60 Hz
	Power consumption:	210 W
Operating ambient temperature:		41°F to 104°F (5°C to 40°C)
Operating ambient humidity:		10% to 90% (no condensation)
Weight:		36.96 lbs (16.8 kg)
Dimensions (W ⋅ H ⋅ D):		16-3/4 ⋅ 6-15/16 ⋅ 16-3/8 inches
Recording format:		DVCPRO format
Recording tracks:		Digital video
		Time code;		Recorded in sub-code area
		Digital audio;		2 channels
		Cue Signal;		1 track
		Control (CTL); 1 track
Tape speed:		33.820 mm/sec
Recording time:		184 minutes (with AJ-5P92LP)
		66 minutes (with AJ-P66MP)
Tape:		1/4-inch thin magnetic layer metal tape
FF/REW time:		Less than 3 minutes (with AJ-5P92LP)
		Less than 2 minutes (with AJ-P66MP)
Editing accuracy:		±0 frame (using time code)
Tape timer accuracy:		±1 frame (using continuous CTL signal)
Servo lock time:		Less than 0.5 sec.
		(color framing/ standby ON)
VIDEO
(Digital video)
Sampling frequencies:		Y; 13.5 MHz/PB, PR; 3.375 MHz
Quantizing:		8 bits
Error correction:		Reed-Solomon product code
(Digital IN/analog component OUT)
Video bandwidth:		Y;	30 Hz to 5.5 MHz (±0.5 dB)
			5.75 MHz (–2 dB)
		PB, PR; 30 Hz to 1.3 MHz (±1 dB)
			1.5 MHz (–5 dB) typ.
S/N ratio:		Better than 60 dB
K factor:		Less than 1%
(Analog component IN/component OUT)
Video bandwidth:		Y;	30 Hz to 5.5 MHz (±1 dB)
			5.75 MHz (–3 dB)
		PB, PR; 30 Hz to 1.3 MHz (±1 dB)
			1.5 MHz (–6 dB) typ.
S/N ratio:		Better than 55 dB
K factor:		Less than 1%
(Analog composite IN/composite OUT)
Video bandwidth:		Y; 30 Hz to 4.5 MHz (±1 dB)
DG:		Less than 4%
DP:		Less than 3°
Y/C delay:		Better than 20 nsec
K factor:		Less than 2%
(Video input connector)
Analog component input:		BNC⋅3 (Y, PB, PR)
		Y;	1.0 Vp-p, 75Ω
		PB, PR; 0.486/0.7 Vp-p switchable, 75Ω
		(75% color bar, 7.5% setup)
Analog composite input:		BNC⋅2, loop-through, 75Ω on/off
Reference input:		Analog composite
		BNC⋅2, loop-through, 75Ω on/off
Serial digital component input
(option):		Complies with SMPTE 259M-C standard,
		BNC⋅2, active through
(Video output connector)
Analog component output:		BNC⋅3 (Y, PB, PR)
		Y;	1.0 Vp-p, 75Ω
		PB, PR; 0.486/0.7 Vp-p switchable, 75Ω
		(75% color bar, 7.5% setup)
Analog composite output:		BNC⋅3
		Video1/video2/video3 (superimpose
		on/off)
Serial digital component output
(option):		Complies with SMPTE 259M-C standard,
		BNC⋅3

(Video signals adjustment)

Composite video input signal:	±3 dB
Video output gain:	±3 dB
Video output chroma gain:	±3 dB
Video output hue:	±30°
Video output setup:	±15 IRE
Video output sync phase:	±15 ∝sec
Video output SC phase:	±180°
Video output Y/C delay:	±300 nsec

AUDIO (Digital audio)

Sampling frequencies:	48 kHz
Quantizing:	16 bits
Frequency response:	20 Hz to 20 kHz ±1 dB
Dynamic range:	Better than 90 dB (1 kHz, emphasis OFF,
	“A” weighted)
Distortion:	Less than 0.05% (1 kHz, emphasis OFF,
	standard level)
Crosstalk:	Less than –80 dB (1 kHz, between
	2 channels)
Wow & flutter:	Below measurable limit
Headroom:	20 dB
Emphasis:	T1=50 ∝sec/T2=15 ∝sec (on/off
	selectable)

(Cue track)

Frequency response:300 Hz to 6 kHz ±3 dB

(Audio input connector)

Analog input (CH1/CH2):	XLR⋅2, 600Ω/high impedance selectable,
	+4/0/–20 dBu
Digital input (CH1/CH2):	XLR⋅1, AES/EBU format
Serial digital input (option):	Complies with SMPTE 259M-C, 272M
	standard (BNC, 75Ω)
Cue track input:	XLR⋅1, 600Ω/high impedance selectable,
	+4/0/–20/–60 dBu

(Audio output connector)

Analog output (CH1/CH2):	XLR⋅2, low impedance, +4/0/–20 dBu
Digital output (CH1/CH2):	XLR⋅1, AES/EBU format
Serial digital output (option):	Complies with SMPTE 259M-C, 272M
	standard (BNC, 75Ω)
Cue track output:	XLR⋅1, low impedance, +4/0/–20 dBu
Monitor output:	XLR⋅2, low impedance, +4/0/–20 dBu
Headphones:	Variable level, mini-jack, 8Ω

Other input/output connector

Time code input:	XLR⋅1, 0.5 to 8 Vp-p
Time code output:	XLR⋅1, 2.0 Vp-p
RS-422A input/output:	D-sub 9-pin, RS-422A interface
RS-422A output:	D-sub 9-pin, RS-422A interface
RS-232C:	D-sub 25-pin, RS-232C interface
Parallel input/output:	D-sub 25-pin
Encoder remote:	D-sub 15-pin

Weight and dimensions shown are approximately.

Specifications are subject to change without notice.

– 101 –