Panasonic AJ-D850P Dv Pb Att, Moni SEL, Inh, CUE Slow, Linear, Direct, Moni MIX L, Moni MIX R

USER menu

<AUDIO> (continued)

	Item		Setting
							Description
No.	Superimposed	No.		Superimposed
	display			display
723	DV PB ATT	0000			OFF	This selects the audio output level for DV or DVCAM format
		0001			ON	playback.
						0: The audio output level is not attenuated.
						1: The audio output level is attenuated (reduced).
						<Notes>
						As indicated below, whether the setting takes effect or not
						depends on the size of the cassette tape used.
						1.	When an “L” size cassette is used
							The setting takes effect only when “DV” or “DVCAM” has
							been selected as the setting for setup menu No. 108
							(FORMAT SEL).
						2.	When an “M” size cassette is used
							The setting does not take effect.
						3.	When an “S” size cassette used
							The setting takes effect.
724	MONI SEL	0000			OFF	This selects whether to allow (enable) or prohibit (disable) the
	INH	0001			ON	operation of the MONITOR SELECT and MONITOR SET
						buttons on the front panel.
						0: The buttons can be operated.
						1: Operation of the buttons is prohibited.
725	CUE SLOW	0000			STEP	This selects the tape travel status (CUE track playback status)
		0001			LINEAR	during SLOW playback.
						0: Priority is given to the output picture, and tape travel is set
							to the step feed status.
						1: Priority is given to CUE track playback, and the tape travel
							is set to the linear status.
						<Notes>
						When “1” (LINEAR) has been set:
						• It may not be possible to achieve as clear a picture as in the
						STEP mode.
						• The CTL counter may not operate properly.
726	CUE OUT	0000		NORMAL		This selects the output signals from the CUE OUT connector.
		0001			DIRECT	0: The timing is aligned with the output picture.
						1: The signals recorded on the tape are output with no delay.
						<Note>
						When “1” (DIRECT) has been set, the output picture and CUE
						output timing will differ.
727	MONI MIX L	0000			OFF	This enables mixed signals to be selected for the monitoring
		0001			CH1+2	through the headphones.
						0: The signals are not mixed.
						1: The CH1 and CH2 signals are mixed and output to the left
							channel.
728	MONI MIX R	0000			OFF	This enables mixed signals to be selected for the monitoring
		0001			CH1+2	through the headphones.
						0: The signals are not mixed.
						1: The CH1 and CH2 signals are mixed and output to the right
							channel.
729	REC PT	0000			OFF	This selects whether to mute the sound at the joins in the
	MUTE	0001			ON	recording during playback in the DV or DVCAM format.
						0: The sound is not muted.
						1: The sound is muted.
730	CUE OUT	0000			OFF	This selects whether the cue signal is to be output to the main
	SEL	0001			ON	line system output in the search mode.
						0: The cue signal is not output.
						1: The cue signal is output.
						(This applies only when a setting other than MANU has been
						selected for setup menu item No. 713 (MONI CH SEL).)

The underline on the setting item denotes the initial setting.

– 73 –