Automatic editing (Deck to Deck)
Editing refers to the job of using a prerecorded tape to produce a complete recording by joining together separate cuts and deleting unnecessary parts.
The basic steps taken for editing are as follows.
1 | Set the CONTROL switch to REMOTE on the player and to LOCAL on the recorder. |
|
|
2 | Select the editing mode. |
|
|
3 | Enter the edit points of the recorder and player. |
|
|
4 | Check and modify the edit points. |
|
|
5 | Check (Preview) before proceeding with the editing. |
|
|
6 | Proceed with the editing. |
|
|
7 | Check (Review) the recording that has resulted from the editing. |
– 31 –
