USER menu
<TIME CODE> (continued)
| Item |
| Setting |
| |||
|
|
|
|
|
|
| Description |
No. | Superimposed | No. |
| Superimposed | |||
display |
| display |
| ||||
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
511 | TC OUT | 0000 |
|
| V OUT |
| This is used to switch the phase of the time code, which is |
| REF | 0001 |
|
| TC_IN | output from the TIME CODE OUT connector, for the external | |
|
|
|
|
|
|
| LTC input when the TC INT/EXT switch is at the EXT position. |
|
|
|
|
|
|
| (In EE mode only) |
|
|
|
|
|
|
| 0: Time code is synchronized with output video signal. |
|
|
|
|
|
|
| 1: Time code is synchronized with external time code input. |
|
|
|
|
|
|
|
|
512 | VITC OUT | 0000 |
|
| SBC |
| This selects how the VITC which is to be superimposed onto |
|
| 0001 |
|
| VAUX | the output video signal is to be output. | |
|
|
|
|
|
|
| 0: During recording: The input time code, which was selected |
|
|
|
|
|
|
| by the setup menu No. 505 (EXT TC |
|
|
|
|
|
|
| SEL) setting and TC INT/EXT switch, is |
|
|
|
|
|
|
| output as the VITC. |
|
|
|
|
|
|
| During playback: The time code recorded in the SBC area |
|
|
|
|
|
|
| is output as the VITC. |
|
|
|
|
|
|
| 1: During recording: The time code detected from the input |
|
|
|
|
|
|
| video signal is output as the VITC. |
|
|
|
|
|
|
| During playback: The time code recorded in the VAUX |
|
|
|
|
|
|
| area is output as the VITC. |
|
|
|
|
|
|
| <Note> |
|
|
|
|
|
|
| The time code detected from the input video signal is |
|
|
|
|
|
|
| automatically recorded in the VAUX area while pictures are |
|
|
|
|
|
|
| being recorded. |
|
|
|
|
|
|
|
|
The underline on the setting item denotes the initial setting.
<VIDEO>
| Item |
| Setting |
| ||||
|
|
|
|
|
|
|
| Description |
No. | Superimposed | No. |
| Superimposed | ||||
| display |
|
| display |
| |||
|
|
|
|
|
|
|
|
|
600 | PB/PR | 0000 |
|
|
| MII | This selects the component input signal level. | |
| IN LV | 0001 |
|
|
| 0: MII level. | ||
|
|
|
|
|
|
|
| 1: ß cam level. |
601 | INT BB | 0000 |
|
|
| OFF | This selects whether to generate the internal black burst | |
| SIG | 0001 |
|
|
| BB |
| signal. |
|
|
|
|
|
|
|
| 0: Signal is not generated. |
|
|
|
|
|
|
|
| 1: Signal is generated. |
602 | INPUT C | 0000 |
|
|
| B/W | This selects color killer processing for the video input signals. | |
| KILL | 0001 |
|
|
| AUTO | 0: The signals are forcibly processed as B/W signals. | |
|
|
|
|
|
|
|
| 1: The signals are automatically processed. |
|
|
|
|
|
|
|
| |
603 | OUT | 0000 |
|
|
|
| This selects whether to float the vertical sync position of the | |
| VSYNC | 0001 |
|
|
| VF | video output in order to align the video output phase with | |
|
|
|
|
|
|
|
| the input in the EE/record/edit modes. |
|
|
|
|
|
|
|
| 0: Signals are not floated. |
|
|
|
|
|
|
|
| 1: Signals are floated. |
|
|
|
|
|
|
|
|
|
The underline on the setting item denotes the initial setting.
SBC (sub code data) area:
This area is separate from the video and audio data area on the helical track. The time codes complying with SMPTE/EBU standards, recording dates and times, and other tape control information are stored here. As with the conventional LTC (linear time code), the time code can be read even during rewinding or fast forwarding. It can also be read out when the tape has stopped.
VAUX (video auxiliary data) area:
This area is to be found in the video data area on the helical track. The additional information relating to the video data is stored here.
– 69 –
