Voice-over facility (internal)
Operating procedure 1
MIC
AMP
Microphone
ANALOGUE | VIDEO | |
AUDIO | ||
OUT | ||
IN* | ||
|
* Connect to the channel whose | |
sound is to be recorded. |
|
TV monitor
1
2
Select INT_VO as the setup menu No. 322 (AUD MEM MODE) setting.
Select the same setting for the channel (CH1 or CH2) on which the sound is to be recorded and for the setup menu No. 323 (AUD MEM CH) channel.
3
4
5
6
7
8
9
Insert the cassette tape for which the
Press the insert button for the channel (CH1 or CH2) on which the sound is to be recorded and ensure that its lamp lights.
Press the PLAY button.
Search the position (IN point) where
Press the IN and SET buttons simultaneously at the IN point.
Input the audio signals to be recorded to the channel which was selected in step 2.
Search the position (OUT point) where
10
Press the A OUT and SET buttons simultaneously at the OUT point. The audio signals to be recorded are stored in the memory.
11
12
Press the STOP button.
Press the AUTO EDIT button to proceed with editing. The audio signals stored in the memory are recorded from the memory onto the cassette tape.
<Note>
The audio signals can be previewed prior to editing by pressing the PREVIEW button while the SET button is held down before the AUTO EDIT button is pressed.
– 43 –
