The contents of the USER2 – USER5 files can be copied (loaded) into the USER1 file. In addition, the contents of the USER1 file can be copied (saved) to the USER2 – USER5 files.
Load or save
USER1
Load or save
Load or save
Load or save
USER2
USER3
USER4
USER5
Settings can be locked.
Settings can be locked.
Settings can be locked.
Settings can be locked.
Loading a user file
1 | Press the MENU button. |
2 | While holding down the STANDBY button, press the REW or FF button, and select |
| USER1. |
3
Turn the search dial and move the cursor ( ＊ ) on the menu screen to setup item No. A00 (LOAD).
MENU |
| ||
<USER1> | NO.A00 - 0000 | ||
803 | TELETEXT DET | AUTO | |
＊A00 | LOAD |
| USER2 |
A01 | SAVE |
| USER2 |
A02 | P.ON LOAD | OFF | |
END |
|
|
|
4 While holding down the search button, turn the search dial and select the user file whose contents are to be loaded into USER1.
5
Press the SET button. The following messages appear on the menu screen and counter display.
Menu screen | Counter display |
| ||||
|
|
|
| TCR 00:00:00:00 | ||
| SETUP LOAD U- | 2 | → | |||
USER |
| → USER1 OK? |
|
|
|
|
|
|
|
|
| ||
2 |
|
|
|
| ||
YES<PLAY>/NO<STOP> |
|
|
|
| ||
|
|
|
|
|
|
|
The user file number selected in step 4 is displayed in the shaded area.
6 Press the PLAY button. The settings of the user file selected in step 4 are loaded, and the USER1 menu display appears. When the STOP button is pressed, the USER1 menu display appears while the settings remain unchanged.
7
8
Turn the search dial and move the cursor ( ＊ ) on the menu screen to any setup item except No. A00 (LOAD) and No. A01 (SAVE).
Press the SET button. The USER1 settings are now stored in the memory.
If the USER1 settings are not going to be stored in the memory, do not press the SET button but press the MENU button.
– 53 –
