Servo reference
This unit automatically selects the input video signal selected by the INPUT switch, the reference video signal supplied from the REF VIDEO input connector or the internal sync signal as the servo reference signal.
When the signal is selected, the unit’s mode and servo reference stand in the relationship shown in the flowchart presented below.
�
1 What is the SERVO REF on the setup menu No. 304 setting?
AUTO
2
Is the unit in the recording mode?
NO
EXT
YES
3
Is the unit in the editing mode? (Is VIDEO, CH1, CH2, CUE or TC selected?)
YES
NO
NO
4 |
| Is the REF VIDEO signal supplied? | NO |
|
|
YES
Is the input video signal available?
YES
The REF VIDEO input signal serves as the reference signal.
The internal sync signal serves as the reference signal.
The input video signal serves as the reference signal.
– 82 –
