<Front Panel Bottom Section>

%7REC INHIBIT switch

This selects whether to enable or inhibit the recording on the cassette tape. ON: The recording on the cassette tape is inhibited.

The REC INHIBIT lamp on the front panel now lights.

OFF: The recording on the cassette tape is enabled provided that the cassette’s accidental erasure prevention mechanism has been set to the recording enable position.

%8MENU button

When this is pressed, the setup menu appears on the TV monitor using VIDEO OUT 3 connector, and the setup menu No. appears on the display.

When it is pressed again, the setup menu setting mode is exited and the original operating mode is restored.

%9SET button

When this is pressed, the data which has been set on the setup menu is entered. After data entry, the setup menu setting mode is exited and the original operating mode is restored.

^0DIAG button

When this is pressed, VTR information is displayed. When it is pressed again, the original display is restored.

There are two types of VTR information: “HOURS METER” information and “WARNING” information. Switching between these types is enabled by pressing the search button. Indicated on the “HOURS METER” screen are the power-on time, drum rotation time, tape travel time, loading count, etc.

Indicated on the “WARNING” screen are the warnings.

– 15 –

Page 15
Image 15
Panasonic AJ-D850P manual 7REC Inhibit switch, 8MENU button, 9SET button, 0DIAG button