Audio V Fade Function
When editing tapes, the edit point splicing selection (setup menu No. 309 and 310) information is recorded on the tape. This information is then sensed during playback, and V fade or cut processing is automatically performed for these sections. [However, only when the playback fade selection (No. 719) is AUTO.]
When the edit point splicing selection (setup menu No. 309 and 310) is CUT
Audio signal A
Audio signal B
Noise appears at the edit splice.
When the edit point splicing selection (setup menu No. 309 and 310) is FADE
Audio signal A | Audio signal B |
V fade is performed instantaneously to eliminate the noise.
<Notes>
•When the playback fade selection (No. 719) is CUT, cut processing is performed for all splices.
•When the playback fade selection (No. 719) is FADE, V fade processing is performed for all splices.
– 84 –
