Panasonic AJ-SD930BE, AJ-SD955BE manual Display panel

CONTENTS

Parts and their functions

Display panel

1					2						3						4				6			8 7		9
																			5
																					SCH			SERVO
525			625			WIDE						REMOTE						VIDEO		AUDIO
dB			dB				dB		dB									Y PB PR		ANALOG
0			0		0				0					CUE				CMPST		AES/EBU		U		=	EDIT REC		INH
-4			-4		-4				-4				dB						USER SET		DVCPRO
-8			-8		-8				-8		-8							SDI		SDI
																							50
-12			-12		-12				-12		-12						SDTI/1394		SDTI/1394
																						DVCAM
																		SG 1 2		SG
-16			-16		-16				-16		-16
-20			-20		-20				-20		-20
-25			-25		-25				-25		-25					CTL
-30			-30		-30				-30		-30
																	TC
-			-		-				-		-
																UB
	L	R		L	R		L	R		L		R		L	R

1TV system displays

The selected TV system is displayed here.

With the AJ-SD955B, it is possible to switch between the 525 interlace and 625 interlace systems by setting setup menu item No. 070 (TV SYSTEM).

With the AJ-SD930B, only the 625 interlace TV system can be used.

625 : This lights when the 625 interlaced TV system is selected.

525 : This lights when the 525 interlaced TV system has been selected. SD955B

2WIDE lamp

This lamp lights when 16:9 wide-screen information is being recorded on a tape.

Recording of wide-screen information can be selected on setup menu No. 645 (WIDE SELECT). This lights lamps during tape playback when wide- screen information has been recorded on the tape.

3REMOTE lamp

This lamp lights when the CONTROL switch has been set to the REMOTE position.

4INPUT SELECT display area

The characters corresponding to the selected input signals light. With all input signals except for analogue audio signals, the fact that no signals have

been selected is indicated by a flashing display.

VIDEO
Y PB PR	: Analogue component video signals
	(option)
CMPST	: Analogue composite video signals
	(option)
SDI	: Serial digital video signals
SDTI/1394	: Compressed digital signals (option)
SG/SG 1/SG 2: Internal reference signals
AUDIO
ANALOG	: Analogue audio signals
AES/EBU	: Digital audio signals
USER SET	: Recording audio signal selection
SDI	: Serial digital audio signals
SDTI/1394	: Compressed digital signals (option)
SG	: Internal reference signals

5U lamp

This lamp lights when UMID information is present on the input signal in E-E mode.

This lamp lights during tape playback when UMID information has been recorded on the tape.

6SCH lamp

This lamp lights when the SCH phase of the external synchronized signal (REF VIDEO) is inside the prescribed range.

At all other times, the lamp is off.

7= lamp

This lamp lights when a cassette tape is inserted into the VTR.

In the standby OFF mode, this lamp is flashing.

8SERVO lamp

This lamp lights when the drum servo or capstan servo locks.

9Channel condition lamps

These lamps light to indicate the error rate status. (green 5 white 5 red)

Green: This lights when the error rates for the video and audio playback signals are both at acceptable levels.

White : This lights when the error rate for the video or audio playback level has increased.

The playback picture and sound remain unaffected even while this lamp is lit.

Red : This lights when the error rate for the video or audio playback level has increased to the extent that correction or interpolation was performed.

12 (E)