Panasonic AJ-SD930BE, AJ-SD955BE manual Setup menus, USER menu, Video, 46 E, Contents

CONTENTS

Setup menus

USER menu			<VIDEO>
No./Item			Description
600		This selects the internal reference signal.
INT SG		0001	BB :
		The black burst is generated.
		0002	CB100 :
		100% colour bars are generated.
		0003	CB75 :
		75% colour bars are generated.
601		This selects whether to float the vertical sync
		position of the video output in order to align
OUT VSYNC		the video output phase with the input in the
		EE/record/edit modes.
		0000	N-VF :Signals are not floated.
		0001	VF : Signals are floated.
602		This selects whether to mute the video output
		signals when a blank on the tape has been
V-MUTE SEL		detected during playback.
		0000	N-MUTE :No muting. (Freeze)
		0001	LOW RF : Muting. (Set to gray.)
603		This selects ON or OFF for the closed caption
	SD955B
		signal of the first field.
CC (F1)
BLANK		0000	BLANK : Signal is forcibly blanked.
		0001	THRU : Signal is not blanked.
		<Note>
		This setup menu is not displayed in the 625i
		system.
604		This selects ON or OFF for the closed caption
	SD955B
		signal of the second field.
CC (F2)
BLANK		0000	BLANK : Signal is forcibly blanked.
		0001	THRU : Signal is not blanked.
		<Note>
		This setup menu is not displayed in the 625i
		system.
605		This selects the freeze mode for still pictures.
FREEZE SEL		0000	FIELD : Field freeze.
		0001	FRAME : Frame freeze.
		<Note>
		When frame freeze has been selected, the frame
		slow status is established with the slow setting.
606		This selects chroma colour killer processing
		for the video output signals.
OUT C KILL
		0000	B/W : No colour signals are output.
		0001	COLOR : Colour signals are output.

No./Item			Description
609		This selects whether to superimpose EDH
		onto the SDI output signals.
EDH
		0000	OFF : EDH is not superimposed.
		0001	ON : EDH is superimposed.
		<Note>
		Even when ON is selected for this setting, EDH is
		not superimposed onto the signals output from
		the SDI OUT 3 connector if the SUPER switch on
		the front panel of the unit is set to ON.
610		This selects the analog component input
	SD955B
		level.
PB/PR IN LV
		0000	M II : M II level
		0001	B-CAM :ß-CAM level
		<Notes>
		OThis setup menu is not displayed in the 625i
		system.
		OWhen no optional board (AJ-YA931G) has
		been installed, setup menu No. 610 is not
		displayed.
611		This selects Y/C separation processing for
		the composite input signals.
YC SEP MODE
		0000	B/W :
		The signals are processed as B/W signals.
		0001	AUTO :
		The signals are automatically detected.
		<Note>
		When no optional board (AJ-YA932G) has been
		installed, setup menu No. 611 is not displayed.
614		This selects the analog component output
	SD955B
		level.
PB/PR OUT LV
		0000	M II : M II level
		0001	B-CAM :ß-CAM level
		<Note>
		This setup menu is not displayed in the 625i
		system.
618		This selects the interpolation operation.
		Vertical interpolation is conducted automatically
INTERPOLATE		during slow-motion playback to reduce the
		vertical movement of the playback pictures.
		However, this menu item enables the
		interpolation operation to be forcibly turned off.
		0000	OFF :
		Interpolation is forcibly turned off.
		0001	AUTO :
		Interpolation is automatically turned on during
		slow-motion playback.

The underlined items indicates the initial setting.

46 (E)