CONTENTS
Setup menus
Saving user files
1 Press the MENU button.
2 Press the REW button or FF button while holding down the DIAG button to select the USER1 file.
3 Turn the search dial to move the cursor (2) on the menu screen to No. A01 (SAVE).
MENU |
| ||
<USER1> | |||
804 | BLANK LINE | BLANK | |
A00 | LOAD |
| USER2 |
2A01 | SAVE |
| USER2 |
A02 | P.ON LOAD | OFF | |
END |
|
|
|
4 Turn the search dial while holding down the search button to select the user file in which the contents of USER1 are to be saved.Those user files which have been set to the lock mode do not appear on the display. If all the user files have been set to the lock mode, the “LOCKED” display appears, and the contents of USER1 cannot be saved into any of the user files.
5 Press the SET button.
The following message appears on the menu screen and counter display.
Menu screen
USER1 n USER2 OK?
YES<PLAY>/NO<STOP>
6 Press the PLAY button.
The settings of USER1 are saved in the user file selected in step 4 and stored in the memory. If the STOP button is pressed instead, the settings are not changed, and the USER1 menu display appears.
7 Turn the search dial to move the cursor (2) on the menu screen to a number other than No. A00 (LOAD) or No. A01 (SAVE).
8 Press the SET button. The USER1 settings are stored in the memory.
If the USER1 settings are not to be stored in the memory, do not press the SET button but press the MENU button instead.
Automatically recalling a user file when turning on the power
If the user file to be loaded is selected in advance using setup menu No. A02 (P.ON LOAD), the file will be automatically loaded into USER1 when the power is turned on.
Counter display
The number of the user file selected in step 4 is displayed at 
.
32 (E)
