Intercom Features
70
For product assistance, visit www.globarange.com
For A assistance, visit www.joip.com
example, from different areas of the
house.
1K i {#}{2}{7}{3}
2{V}/{^}: Select the desired setting.
3M i {i}
Note:
LAuto intercom cannot be used when:
– your handset is receiving a
transferred outside call.
all handsets are being paged by the
base unit.
Answering an intercom call using
auto intercom
1When you are paged by another
handset, speak into the
microphone.
LTo switch to the receiver, press
{s}.
2To end the intercom, press {i}.
Monitoring audio in a room
You can listen to the sound in a room
where another handset is located.
Important:
LBefore using this feature, set auto
intercom on the destination handset to
On (Ringer Off) to allow access
by other handsets.
1Call the destination handset (page
69).
LYou can listen to the audio.
2To mute your sound output, press
1 if necessary.
3Press {i} to stop monitoring.
Intercom features between the handset and base unit

Intercom calls

Intercom calls can be made between the
handset and base unit.
Note:
LIf you receive an outside call while
talking on the intercom, the interrupt
tone sounds. To answer the call:
–press {TEL} or {IP} on the handset.
–press {TEL} or {IP} on the base
unit. (BB-GT1540)
To turn the interrupt tone off, see page
51.
LWhen paging unit(s) for an intercom
call, the paged unit(s) beeps for 1
minute.
Making an intercom call
1{INT}
2To page the base unit, press {0}.
LTo stop paging, press {i}.
3When you finish talking, press {i}.
BB-GT1520/BB-GT1522
1{x}
LAll handsets beep for 1 minute.
LTo stop paging, press {x}.
2When you finish talking, press {x}.
Available model:
BB-GT1520/BB-GT1522/BB-GT1540
Handset
Base unit
GT15xxE.book Page 70 Wednesday, August 1, 2007 11:59 AM