CS-E9DKEW CU-E9DKE / CS-E12DKEW CU-E12DKE

2.2.Indoor Unit

Automatic Operation Switch

•Press for < 5s to run Automatic Operation. (Used when the remote control cannot be used.)

•Press continuously for 5s and < 8s to run Forced Cooling Operation.

•Press continuously for 8s and < 11s to run Forced Heating Operation.

•Press continuously for 11s and < 16s to

change different remote controlling setting (A↔B Mode).

•Press continuously for 16s or < 21s to switch OFF / ON Remote Control Receiving Sound or H14 Abnormality Detection Mode.

Operation Indication Lamps (LED)

•POWER (Green) ........ Lights up in operation, blinks in Automatic Operation Mode judging and Hot Start operation.

•TIMER (Orange) ...... Lights up in Timer Setting.

Blinks in Self Diagnosis Control.

•QUIET (Orange) ...... Lights up in Quiet Mode Operation.

•POWERFUL (Orange) ..... Lights up when Powerful Mode is selected.

• (Green) .............. Lights up in Ionizer Mode Operation.

•SUPER

ALLERU-BUSTER(Blue) ... Lights up in

operation.

Four Operation Modes

•Automatic, Heating, Cooling and Soft Dry Operation.

Automatic and 5 Manual Indoor

Fan Speeds

Automatic and 5 Manual Vertical

Airflow Directions

Automatic and 5 Manual Horizontal Airflow Directions

Powerful Mode

•For quick cooling or heating.

Quiet Mode

•To provide quiet operation.

Ionizer Control

•Ionizer control for generate negative ion in discharge air.

Delay ON Timer and OFF Timer

Automatic Restart Control

•Operation is restarted after power failure at previous setting mode.

Microcomputer-controlled Room

Temperature Control

4