VQT1S88
12
Preparation
Preparation
Charging the Battery•Use the dedicated charger and battery.
•The battery is not charged when the camera is shipped. Charge the battery before use.
•Charge the battery with the charger indoors.
•Charge the battery in a temperature between 10 oC to 35 oC (50oF to 95 oF). (The battery
temperature should also be the same.)
∫When the [CHARGE] indicator flashes
•The battery temperature is excessively high or low. The charging time will be longer than
normal. Also, charging may not be completed.
•The terminals of the charger or the battery are dirty. In this case, wipe them with a dry cloth.
Note
•
After charging is completed, be sure to disconnect the power supply device from the electrical outlet.
•The battery becomes warm after using it and during and after charging. The camera also
becomes warm during use. This is not a malfunction.
•The battery will be exhausted if left for a long period of time after being charged.
•
The battery can be recharged even when it still has some charge left, but it is not recommended
that the battery charge be frequently topped up while the battery is fully charged. (The battery
has characteristics that will reduce its operating duration and cause the battery to swell up.)
•When the operating time of the camera becomes extremely short even after properly charging
the battery, the life of the battery may have expired. Buy a new battery.
•Do not leave any metal items (such as clips) near the contact areas of the power plug.
Otherwise, a fire and/or electric shocks may be caused by short-circuiting or the
resulting heat generated.
Attach the battery with attention
to the direction of the battery.
Connect the charger to the
electrical outlet.
•Charging starts when the [CHARGE]
indicator A lights green.
•Charging is complete when the
[CHARGE] indicator A turns off (after
approx. 130 min maximum).
Detach the battery after
charging is completed.
1
2
3
DMCFX150-VQT1S88_mst.book 12 ページ 2008年7月9日 水曜日 午後8時18分