VQT1S88
70
Advanced (Recording pictures)
For details on [REC] mode menu settings, refer to P18.
Contrast and exposure will be adjusted automatically when there is a big difference in
brightness between the background and subject, to bring the image close to how you see.
Applicable modes: ³²
[OFF]/[LOW]/[STANDARD]/[HIGH]
Note
•When it is set to [LOW], [STANDARD] or [HIGH], [ ] is displayed on the screen.
•Even when the [SENSITIVITY] is set to [ISO100], [SENSITIVITY] may be set higher than
[ISO100] if the picture is taken with [I.EXPOSURE].
•Compensation effect may not be achieved depending on the conditions.
•[ ] in the screen turns to yellow when [I.EXPOSURE] is in effect.
For details on [REC] mode menu settings, refer to P18.
Using this function, you can achieve the kind of effect that is obtained when an image is
exposed two or three times.
Applicable modes: ³²
1Select [START] and then press [MENU/SET].
2Decide on the composition, and take
the first picture.
•After taking the picture, press the shutter button halfway down to
take the next picture.
•Press 3/4 to select the item and then press [MENU/SET] for one of
the following operations.
3Decide on the composition, and take the second picture.
•After taking the picture, the first and second pictures taken will be
superimposed over each other and displayed.
•After taking the picture, press the shutter button halfway down to
take the next picture.
•Press 3/4 to select the item and then press [MENU/SET] for one of
the following operations.
[I.EXPOSURE][MULTI EXPO.][NEXT]: Advance to the next picture.
[RETAKE]: Return to the first picture.
[EXIT]: Record the image of the first picture, and finish the multiple
exposure picture-taking session.
[NEXT]: Advance to the next picture.
[RETAKE]: Return to the second picture.
[EXIT]: Record images up to the second picture taken, and finish the
multiple exposure picture-taking session.
VQT1S88~Body2_mst.fm 70 ページ ２００８年７月１０日 木曜日 午後４時２分