65
VQT1S88
Advanced (Recording pictures)
∫Finely adjusting the white balance [ ]
You can finely adjust the white balance when you cannot acquire the desired hue by
setting the white balance.
•It can be set from the quick menu (P19).
1Select [WHITE BALANCE] and then press 1
•Press 1 again if [ ], [ ] or [ ] is selected.
2Press 3/4/2/1 to adjust the white balance and then press
[MENU/SET].
•If you finely adjust the white balance to A (amber), the white balance icon on the LCD
monitor will change to orange. If you finely adjust the white balance to B (blue), the whi te
balance icon on the LCD monitor will change to blue.
•If you finely adjust the white balance to G_ (green) or M` (magenta), [_] (green) or [`]
(magenta) appears beside the white balance icon on the LCD monitor.
•Select the center point if you are not finely adjusting the white balance.
•You can finely adjust the white balance independently for each white balance item.
•The white balance fine adjustment setting is memorized even if the camera is turned off.
•The white balance fine adjustment setting is reflected in the picture when using the fl ash.
•The white balance fine adjustment level returns to the standard setting (center point) in
the following cases.
–When you reset the white balance in [ ] or [ ]
–When you reset the color temperature manually in [ ]
∫Auto white balance
Depending on the conditions prevailing when pictures are taken, the pictures may take on
a reddish or bluish tinge. Furthermore, when a multiple number of light sources are being
used or there is nothing with a color close to white, auto white balance may not function
properly. In a case like this, set the white balance to a mode other than [AWB].
1 Auto white balance will work within this range.
2 Blue sky
3 Cloudy sky (Rain)
4 Shade
5 TV screen
6 Sunlight
7 White fluorescent light
8 Incandescent light bulb
9 Sunrise and sunset
10 Candlelight
KlKelvin color Temperature
∫Setting the color temperature
You can set the color temperature manually for taking natural pictures
in different lighting conditions. The color of light is measured as a
number in degrees Kelvin. As the color temperature becomes high the
picture becomes bluish and as the color temperature becomes low the
picture becomes reddish.
1Select [ ] and then press 1.
2Press 3/4 to select the color temperature and then press [MENU/SET].
•You can set a color temperature from [2500K] to [10000K].
2 : A (AMBER: ORANGE)
1 : B (BLUE: BLUISH)
3 : G_ (GREEN: GREENISH)
4 : M` (MAGENTA: REDDISH)
1 2
1 2
1)
2)
3)
4) 5)
6)
7)
8)
9)
10)
DMCFX150-VQT1S88_mst.book 65 ページ ２００８年７月９日　水曜日　午後８時１８分