Panasonic DMC-FX150 1 Select [CANCEL] on the screen shown in step 2 2, Select [AUDIO DUB.] on the [PLAYBACK] mode menu. (P18), Select the picture, and then press , B [AUDIO DUB.] Press 2/1 to select the picture and then press [MENU/SET] to start audio recording., Press [MENU/SET] to stop recording.

91
VQT1S88
Advanced (Playback)
Press [‚] to return to the menu screen.
•Press [MENU/SET] to close the menu.
∫Canceling all the [PROTECT] settings
1Select [CANCEL] on the screen shown in step 2 and then press [MENU/SET].
2Press 3 to select [YES] and then press [MENU/SET].
3Press [MENU/SET] to close the menu.
•If you press [MENU/SET] while canceling protection, the canceling will stop halfway.
Note
•The protect setting may not be effective on other equipment.
•Even if you protect pictures in the built-in memory or a card, they will be deleted if the bui lt-in
memory or the card is formatted.
•Even if you do not protect pictures on an SD Memory Card or an SDHC Memory Card, they
cannot be deleted when the card’s Write-Protect switch is set to [LOCK].
You can add the audio after taking a picture.
Select [AUDIO DUB.] on the [PLAYBACK] mode menu. (P18)
Select the picture, and then press
[MENU/SET].
When [MULTI] has been selected
•Repeat these steps for each picture.
•The settings are canceled when [MENU/
SET] is pressed again.
[SINGLE] [MULTI]
Press 2/1 to
select the picture. Press 3/4/2/1
to select the
pictures.
B [AUDIO DUB.]
Press 2/1 to select the picture and then press
[MENU/SET] to start audio recording.
•The message [OVERWRITE AUDIO DATA?] screen appears
when audio has already been recorded. Press 3 to select [YES]
and then press [MENU/SET] to start audio recording. (The
original audio is overwritten.)
•Audio is recorded from the built-in microphone on the camera.
•If you press [‚], the audio dubbing is canceled.
Press [MENU/SET] to stop recording.
•It will automatically stop after recording about 10seconds without
pressing [MENU/SET].
3
4
1
2
3
DMCFX150-VQT1S88_mst.book 91 ページ ２００８年７月９日 水曜日 午後８時１８分