51
VQT1S88
Advanced (Recording pictures)
This takes pictures of a baby with a healthy complexion. When you use the flash, the light
from it is weaker than usual.
It is possible to set different birthdays and names for [BABY1] and [BABY2]. You can
select to have these appear at the time of playback, or have them stamped on the
recorded image using [TEXT STAMP] (P83).
∫Birthday/Name setting
1Press 3/4 to select [AGE] or [NAME] and then press 1.
2Press 3/4 to select [SET] and then press [MENU/SET].
3Enter the birthday or name.
Birthday:
2/1: Select the items (year/month/day).
3/4: Setting.
[MENU/SET]: Exit.
Name: For details on how to enter characters, read the [TITLE EDIT] section on P81.
•When the birthday or name is set, [AGE] or [NAME] is automatically set to [ON].
•If [ON] is selected when the birthday or name has not been registered, the setting screen
appears automatically.
4Press [MENU/SET] to finish.
∫To cancel [AGE] and [NAME]
Select the [OFF] setting in step 2 of the “Birthday/Name setting” procedure.
Note
•The age and name can be printed out using the “PHOTOfunSTUDIO-viewer-” bundled s oftware
on the CD-ROM (supplied).
•If [AGE] or [NAME] is set to [OFF] even when the birthday or name has been set, the age or
name will not be displayed. Before taking pictures, set [AGE] or [NAME] to [ON].
•The focus range becomes the same as macro mode. [5 cm (0.17 feet) (Wide)/30 cm (0.99 feet)
(Tele) to ¶]
•[INTELLIGENT ISO] is activated, and maximum ISO sensitivity level becomes [ISO400].
•If the camera is turned on with [BABY1]/[BABY2] set, the age and name are displayed at the
lower left of the screen for about 5 seconds, along with the current date and time .
•If the age is not properly displayed, check the clock and birthday settings.
•If [QUALITY] is set to [ ] or[ ] and pictures are taken, the name is not registered on the
pictures.
•The birthday setting and name setting can be reset with [RESET].
•The initial setting for [AFMODE] is [š].
Select this when you want to take pictures of a pet such as a dog or a cat.
You can set your pet’s birthday and name. You can select to have these appear at the time
of playback, or have them stamped on the recorded image using [TEXT STAMP] (P83).
For information about [AGE] or [NAME], refer to [BABY1]/[BABY2] on P51.
Note
•The initial setting for the AF assist lamp is [OFF].
•[INTELLIGENT ISO] is activated, and maximum ISO sensitivity level becomes [ISO800].
•The initial setting for [AFMODE] is [ ].
•The focus range becomes the same as macro mode. [5 cm (0.17 feet) (Wide)/30 cm (0.99 feet)
(Tele) to ¶]
•Refer to [BABY1]/[BABY2] for other information about this mode.
: [BABY1]/; [BABY2]
í [PET]
DMCFX150-VQT1S88_mst.book 51 ページ ２００８年７月９日 水曜日 午後８時１８分