VQT1S88
76
Advanced (Playback)
Operations performed during slide show
The cursor displayed during playback is the same as 3/4/2/1.
The menu screen is restored when [] is pressed.
Changing the slide show settings
You can change the settings for slide show playback by selecting
[EFFECT] or [SETUP] on the slide show menu screen.
[EFFECT]
This allows you to select the screen effects or music effects when
switching from one picture to the next.
[NATURAL], [SLOW], [SWING], [URBAN], [OFF], [AUTO]
When [URBAN] has been selected, the picture may appear in black and white as a screen
effect.
[AUTO] can be used only when [CATEGORY SELECTION] has been selected. The pictures
are played back with the recommended effects in each category.
[SETUP]
[DURATION] or [REPEAT] can be set.
[DURATION] can be set only when [OFF] has been selected as the [EFFECT] setting.
[AUDIO] will be displayed only when the [EFFECT] is set to [OFF]. Audio will be played along
with the still picture with audio by setting the [AUDIO] to [ON].
Note
Motion pictures cannot be played back as a slide show.
It is not possible to add new music effects.
Press 3 to select [START] and then press [MENU/
SET].
Press 4 to finish the slide show.
Normal playback resumes after the slide show finishes.
APlay/Pause
BStop
CBack to previous picture¢
DAhead to next picture¢
¢These operations can be performed only in the pause mode.
EReduce volume level
FIncrease volume level
Item Settings
[DURATION] 1SEC./2SEC./3SEC./5SEC.
[REPEAT] ON/OFF
[MUSIC]/[AUDIO] ON/OFF
6
7
DMCFX150-VQT1S88_mst.book 76 ページ 2008年7月9日 水曜日 午後8時18分