VQT1S88
94
Connecting to other equipment
Disconnecting the USB connection cable safely
Proceed with the hardware removal using “Safely Remove Hardware” on the task tray of the
PC. If the icon is not displayed, check that [ACCESS] is not displayed on the LCD monitor of
the digital camera before removing the hardware.
Note
Turn the camera off before connecting or disconnecting the AC adaptor (DMW-AC5PP; optional).
Before inserting or removing a card, turn the camera off and disconnect the USB connection
cable. Otherwise, data may be destroyed.
With the Mac OS X v10.2 or an earlier operating system, set the Write-Protect switch of the
SDHC memory card to the [LOCK] position when importing pictures from an SDHC memory card.
Viewing the contents of the built-in memory or card using the PC (folder composition)
A new folder is created when pictures are taken in the following situations.
After [NO.RESET] (P22) in the [SETUP] menu has been executed
When a card containing a folder with the same folder number has been inse rted (Such as when
pictures were taken using another make of camera)
When there is a picture with file number 999 inside the folder
Connection in the PTP mode (WindowsR XP, Windows VistaR and Mac OS X only)
Set [USB MODE] to [PictBridge(PTP)].
Data can now be read only from the card into the PC.
When there are 1000 or more pictures on a card, the pictures may not be imported in the PTP mode.
Double-click on [Removable Disk] in [My Computer].
When using a Macintosh, the drive is displayed on the desktop. (“LUMIX”, “NO_NAME”
or “Untitled” is displayed.)
Double-click [DCIM] folder.Using a drag-and-drop operation, move the pictures you want to acquire or the folder storing those pictures to any different folder on the PC.
1Folder number
2File number
3JPG: Pictures
MOV: Motion pictures
RW2: Pictures in RAW files
MISC: DPOF print
Favorite
3
4
5
DMCFX150-VQT1S88_mst.book 94 ページ 2008年7月9日 水曜日 午後8時18分