71
VQT1S88
Advanced (Recording pictures)
4Decide on the composition, and take the third picture.
•After taking the picture, the images of the first, second and third
pictures taken will be superimposed over one another and
displayed.
•Press 3 to select [RETAKE] and then press [MENU/SET] to
return to the third picture.
5Press 4 to select [EXIT] and then
press [MENU/SET].
•You can also press the shutter button halfway to finish.
•The images up to the third picture taken are recorded, and the multiple exposure
picture-taking session will be completed.
∫About automatic gain control setting
Select [AUTO GAIN] on the screen shown in step 1 and set it.
Note
•The recording information displayed for pictures taken with multiple e xp os u re s is the recording
information for the last picture taken.
•If [MENU/SET] is pressed while taking pictures, the photographed images are recorded, and
the multiple exposure picture-taking session will be completed.
•Image is not recorded until completion.
•Some functions have restrictions. You will not be able to use the following functions:
–Burst mode/[AUTO BRACKET]/[COLORBRACKET]/Extended optical zoom/Digital zoom/
[I.EXPOSURE]/[AUDIO REC.]
•We recommend using a tripod if taking pictures with multiple exposures.
•The multiple exposure setting is released at the following times:
–When the power has been turned off
–When the card has been changed
–When the USB connection cable has been connected to the camera
–When the camera has been switched from [REC] mode to playback mode
–When the position of the mode dial has been changed
•[PICTURE SIZE] is fixed when [START] is selected.
•The zoom position and white balance are fixed when the first picture is taken.
For details on [REC] mode menu settings, refer to P18.
This can enlarge subjects even more than the optical zoom or extended optical zoom.
Applicable modes: ³²¿n
[OFF]/[ON]
Note
•Refer to P31 for details.
•If camera shake (jitter) is a problem during zooming, it is recommended that [STABILIZER] be
set to [AUTO] or [MODE 1].
[ON]: The brightness level is adjusted according to the number of pictures taken
and the pictures are superimposed over each other.
[OFF]: Compensate the exposure to match the subject so that all the superimposed
exposure effects will be just right.
) [DIGITALZOOM]DMCFX150-VQT1S88_mst.book 71 ページ ２００８年７月９日 水曜日 午後８時１８分