Panasonic DMC-GF1K Recording motion pictures with the desired, Picture button again

Advanced (Recording pictures)

[REC] mode:

Recording motion pictures with the desired

settings (: Motion Picture P mode)

You can set the degree of peripheral defocus created by the exposure compensation or the aperture setting and record motion pictures.

Set the mode dial to [].

Set the Focus Mode (P98)

Press the rear dial to change the settings screen.

STD STD STD

AFS －3 0 +3 AUTO AWB R1m40s AFS －3 0 +3 AUTO AWB R1m40s AFS －3 0 +3 AUTO AWB R1m40s

Athe exposure compensation

Bthe degree of peripheral defocus

•With each press of the rear dial, the camera switches between Exposure Compensation and the degree of peripheral defocus setting operations.

•The degree of peripheral defocus guide disappears after approximately 4 seconds if no operation is performed.

Rotate the rear dial to change the settings.

Press the motion picture button to start		STD
the recording.
Stop the recording by pressing the motion	AFS
			－3 0 +3	AUTO AWB R1m40s

picture button again.

•If the card becomes full in the middle of recording, the camera stops recording automatically.

•You can also start/stop motion picture recording by pressing the shutter button.

•Sound will go off when pressing the motion picture button or shutter button indicating motion picture recording start/stop.

Sound volume can be set in [BEEP] (P33).

∫About the flicker reduction function

The flicker reduction function can be switched [ON]/[OFF] by pressing the [‚].

•If there is marked flicker or striping when recording motion pictures under fluorescent lighting in regions with a 60 Hz mains supply, set the Flicker Reduction Function to [ON]. The Flicker Reduction Function will activate, automatically adjusting the shutter speed to 1/120. Note that you cannot use PERIPHERAL DEFOCUS with the Flicker Reduction Function.

104 VQT2G62