Panasonic DMC-GF1K Text Stamp, ‘ appears on screen if the picture is stamped with text

Advanced (Playback)

∫Delete the title

[SINGLE] setting

1In step 4, delete all the texts, select [EXIT], and press [MENU/SET].

2Press [‚].

3Press [MENU/SET] to close the menu.

[MULTI] setting

1Select [EXIT] without entering text in step 4, and then press [MENU/SET].

2Press [MENU/SET] to close the menu.

Note

•Text can be scrolled if all of the registered text does not fit on the screen.

•The name setting of [FACE RECOG.] or [BABY1]/[BABY2] and [PET] in Scene Mode or [LOCATION] in Travel Date can also be registered by using the operation in steps 4 and following.

•The name setting of [BABY1]/[BABY2] or [PET] in Scene Mode, [LOCATION] in Travel Date and [TITLE EDIT] cannot be registered at the same time.

•You can print out texts (comments) using the “PHOTOfunSTUDIO 4.0 HD Edition” bundled software on the CD-ROM (supplied).

•You can set up to 50 pictures at one time with [MULTI].

•You cannot use title edit for the following pictures.

–Motion pictures

–Protected pictures

–Pictures taken with [ ], [ ] or [ ]

–Pictures recorded with other equipment

[TEXT STAMP]

You can stamp the recording date/time, age, travel date or title onto the recorded pictures. It is suitable for regular size printing. (Pictures with a picture size larger than [S] will be resized when stamping the date etc. on them.)

Select [TEXT STAMP] on the [PLAYBACK] mode menu. (P28)

Press 3/4 to select [SINGLE] or [MULTI] and then press [MENU/SET].

Select the picture, and then press [MENU/SET] to set.

•[‘] appears on screen if the picture is stamped with text.

[MULTI] setting

Press [DISPLAY] to set (repeat), and then press [MENU/SET] to set.

•The setting is cancelled when [DISPLAY] is pressed again.

[SINGLE][MULTI]

Press 2/1 to select Press 3/4/2/1 to

the picture. select the pictures.

VQT2G62 139