Panasonic DMC-GF1K operating instructions OFF „ Auto Power LCD, … Power LCD, Muted t Low u High

Preparation

[MONITOR]/

[VIEWFINDER]

Brightness, colour, or red or blue tint of the LCD monitor/optional external viewfinder is adjusted.

•Adjust the brightness of the screen with 3/4, contrast and saturation with 2/1 or the rear dial.

•When [DISPLAY] is pressed in screen shown right, it will switch to the colour adjustment screen. Adjust between red and green with 3/4, or between orange and blue with 2/1 or the rear dial.

Press [MENU/SET] to return to the LCD adjustment screen.

•It will adjust the LCD monitor when the LCD monitor is in use, and the viewfinder when optional external viewfinder is in use.

LCD

[LCD MODE]

These menu settings make it easier to see the LCD monitor when you are in bright places.

[OFF]

„[AUTO POWER LCD]:

The brightness is adjusted automatically depending on how bright it is around the camera.

…[POWER LCD]:

The LCD monitor becomes brighter and easier to see even when taking pictures outdoors.

•The brightness of the pictures displayed on the LCD monitor is increased so some subjects may appear differently from actuality on the LCD monitor. However, this does not affect the recorded pictures.

•The LCD monitor automatically returns to normal brightness after 30 seconds when recording in Power LCD mode. Press any button to make the LCD monitor bright again.

•If the screen is difficult to see because of light from the sun etc. shining on it, use your hand or another object to block the light.

•The number of recordable pictures decreases in Auto Power LCD and Power LCD modes.

•[AUTO POWER LCD] cannot be selected when playing back pictures.

•[AUTO POWER LCD] is disabled during motion picture recording.

•When the menu screen is displayed in a dark environment etc., the LCD monitor becomes darker even if [LCD MODE] is set to [OFF].

}[SCENE MENU]

Set the screen that is displayed when the mode dial is set to .

[OFF]: The recording screen in the currently selected scene mode appears.

[AUTO]: The scene mode menu screen appears.

[BEEP]

Set the focus confirmation beep, the self-timer beep and the alarm beep.

[s] (Muted) [t] (Low) [u] (High)

u[VOLUME]

Adjust the volume of the speaker to any of 7 levels.

•When you connect the camera to a TV, the volume of the TV speakers does not change.

VQT2G62 33