Panasonic DMC-GF1K operating instructions Printing the Pictures

Connecting to other equipment

Printing the Pictures

If you connect the camera to a printer supporting PictBridge, you can select the pictures to be printed out and instruct that printing be started on the camera’s LCD monitor.

Preparations: Turn on the camera and the printer.

Perform the print quality and other settings at the printer before printing the pictures.

AUSB connection cable (supplied)

•Check the directions of the connectors, and plug them straight in or unplug them straight out. (Otherwise the connectors may be bent out of shape which may cause malfunction.)

BAlign the marks, and insert.

CDC cable (DMW-DCC3; optional)

•Use a battery with sufficient battery power or the AC adaptor (P167). If the remaining battery power becomes low while the camera and the printer are connected, the status indicator blinks and the alarm beeps. If this happens during printing, stop printing at once. If not printing, disconnect the USB connection cable.

Connect the camera to a printer via the USB connection cable A

(supplied).

•When the camera is connected to the printer, the cable disconnect prohibit icon [å] appears. Do not disconnect the USB cable while [å] is displayed.

Press 3/4 to select [PictBridge(PTP)], and then press [MENU/SET].

USB MODE

PLEASE SELECT

THE USB MODE

PictBridge(PTP)

PC

SELECT SET MENU

Note

•Do not use any other USB connection cables except the supplied one. Use of cables other than the supplied USB connection cable may cause malfunction.

•Turn the camera off before connecting or disconnecting the AC adaptor (P167).

•Before inserting or removing a card, turn the camera off, and disconnect the USB connection cable.

•HDMI connection is disabled and connection with the USB connection cable will take priority when you connect the USB connection cable while the HDMI mini cable is connected (P150).

•Motion pictures recorded in [AVCHD Lite] cannot be printed out.

158 VQT2G62