Panasonic DMC-GF1K operating instructions Auto, 1080i, 720p, 576p¢1/480p¢2

Preparation

[HDMI MODE]

Set the format for the HDMI output when playing back on the HDMI compatible high definition TV connected with this unit using the HDMI mini cable (optional).

[AUTO]:

The output resolution is automatically set based on the information from the connected TV.

[1080i]:

The interlace method with 1080 available scan lines is used for output.

[720p]:

The progressive method with 720 available scan lines is used for output.

[576p]¢1/[480p]¢2:

The progressive method with 576¢1/480¢2 available scan lines is used for output.

¢1 When [VIDEO OUT] is set to [PAL] ¢2 When [VIDEO OUT] is set to [NTSC]

•Interlace method/progressive method

i= interlace scanning is scanning the screen with half of the effective scanning lines every 1/50 seconds, where p= progressive scanning is a high density image signal that is scanning the screen with all the effective scanning lines every 1/50 seconds.

The [HDMI] terminal on this unit is compatible with high definition output [1080i]. It is necessary to have a compatible TV to enjoy progressive and high definition images.

•If the images are not output on the TV when the setting is [AUTO], match with the image format your TV can display, and select number of effective scanning lines. (Please read the operating instructions for the TV.)

•This will work when the HDMI mini cable (optional) is connected.

•Refer to P150 for details.

[VIERA Link]

Setup so this unit can be controlled by the remote control of the VIERA by automatically coupling this unit with the VIERA Link compatible equipment using HDMI mini cable (optional).

[OFF]: Operation is performed with the buttons on this unit.

[ON]: Remote control operation of the VIERA Link compatible equipment is enabled. (Not all operations are possible)

Button operation of the main unit will be limited.

•This will work when the HDMI mini cable (optional) is connected.

•Refer to P151 for details.

[VERSION DISP.]

This enables the firmware versions of the camera and lens to be checked.

•[–. –] is displayed as the lens firmware when the lens is not mounted.

VQT2G62 35