Panasonic DMC-GF1K Auto Registration, Add the picture, and then press MENU/SET

Advanced (Recording pictures)

Auto Registration

When [AUTO REGISTRATION] is set to [ON] in step 3 of “Change the information for a registered person” (P109) while [FACE RECOG.] in the [REC] Mode menu is set to [ON], the registration screen will display automatically after taking a picture of a face that has a high number of appearances.

•Registration screen is displayed after approximately 3 pictures. (It is not counted when Burst Mode, Auto Bracket, White Balance Bracket, Multi Film Bracket or [AUDIO REC.] is set.)

•It may be extremely hard to recognise only with [AUTO REGISTRATION], so register the face images with [FACE RECOG.] in the [REC] Mode menu beforehand.

∫Registering from the automatic registration screen

1Press 3 to select [YES] and then press [MENU/SET].

•If there are no registered persons, proceed to step 3.

•Selection screen is displayed again when [NO] is selected, and when [YES] is selected with 3, [AUTO REGISTRATION] will be set to [OFF].

2Press 3/4 to select [NEW PERSON] or [ADDITIONAL IMAGE] and then press [MENU/SET].

Item	Description of settings
[NEW PERSON]	• A list of registered people is displayed when there are 6 people
	already registered. Select the person to be replaced.
	To additionally register a face image for a registered person.
	Press 3/4/2/1 to select the person to whom you wish
[ADDITIONAL IMAGE]	add the picture, and then press [MENU/SET].
	• If 3 images have already been registered, the picture
	replacement screen will appear. In this case, select the picture
	you wish to replace.

•After additionally registering or changing a face image, the screen returns automatically to the recording screen.

3Perform the operation in Step 5 and following in “Registering face image of new person”.

Note

•If the registration screen will not display, it may display easier by recording in the same conditions or with the same expressions.

•If a face is not recognised even though it is registered, it will make the recognition easier by registering the person again using the [FACE RECOG.] in the [REC] Mode menu in that environment.

•If the registration screen is displayed for the person that is already registered, it will make the recognition easier by additionally registering.

•It may make recognition harder when a picture recorded with flash is registered.

110 VQT2G62