Panasonic DMC-GF1K operating instructions Shutter-priority AE

Advanced (Recording pictures)

[ ] Shutter-priority AE

When you want to take a sharp picture of a fast moving subject, set with a faster shutter speed. When you want to create a trail effect, set to a slower shutter speed.

Set the mode dial to [].

Rotate the rear dial to set the shutter speed.

• It will switch between shutter speed setting operation and Exposure Compensation operation every time the rear dial is pressed.

•Rotate the rear dial to display the [EXPO.METER]. (P127)

Take a picture.

Note

•It will be a normal motion picture recording when recording a motion picture.

•The brightness of the LCD monitor/optional external viewfinder and the recorded pictures may differ. Check the pictures on the playback screen.

•Set the aperture value to a higher number when the subject is too bright in Aperture-Priority AE Mode. Set the aperture value to a lower number when the subject is too dim.

•When you use a lens with an aperture ring, the setting for the rear dial becomes effective if you rotate the aperture ring to the [A] position and the aperture ring setting takes priority if you rotate the aperture ring to a position other than [A] in Aperture-Priority AE Mode.

•The aperture value and the shutter speed displayed on the screen turn red and blink when the exposure is not adequate.

•We recommend using a tripod when the shutter speed is slow.

•When the flash is activated, the shutter speed cannot be set to faster than 1/160th of a second in Shutter-Priority AE Mode. (P62)

•If you press the shutter button fully when the shutter speed is slow, the shutter speed on the screen counts down in Shutter-Priority AE Mode.

•[] and [ ] cannot be set for Shutter-Priority AE Mode.

•The [SENSITIVITY] is automatically set to [AUTO] when you switch the recording mode to Shutter-Priority AE Mode while the [SENSITIVITY] is set to [] (Intelligent).

VQT2G62 85