Advanced (Recording pictures)

[I.EXPOSURE] (Intelligent exposure adjustment)

For details on [REC] mode menu settings, refer to P28.

Contrast and exposure will be adjusted automatically when there is a big difference in brightness between the background and subject, to bring the image close to how you see.

Applicable modes: [OFF]/[LOW]/[STANDARD]/[HIGH]

Note

Even when the [SENSITIVITY] is set to [ISO100]/[ISO125], [SENSITIVITY] may be set higher than [ISO100]/[ISO125] if the picture is taken with [I.EXPOSURE] set to valid.

Compensation effect may not be achieved depending on the conditions.

[ ] in the screen turns to yellow when [I.EXPOSURE] is in effect.

[LOW], [STANDARD], or [HIGH] represents the maximum range of effect.

[LONG SHTR NR]

For details on [REC] mode menu settings, refer to P28.

The camera automatically removes noise that appears when the shutter speed becomes slower to take pictures of night scenery etc. so you can take beautiful pictures.

Applicable modes: [OFF]/[ON]

Note

If you set [ON], the countdown screen is displayed when the shutter button is pressed. Do not move the camera at this time. After the countdown is finished, [PLEASE WAIT...] is displayed for the same time as the selected shutter speed for signal processing.

We recommend using a tripod when the shutter speed is slowed to take pictures.

This does not operate during motion picture recording.

[ISO LIMIT SET]

For details on [REC] mode menu settings, refer to P28.

It will select optimal ISO sensitivity with set value as limit depending on the brightness of the subject.

Applicable modes: [OFF]/[200]/[400]/[800]/[1600]

Note

The upper limit of the ISO sensitivity can be set.

The higher the value set for the ISO sensitivity, the more the jitter is reduced but the greater the amount of picture noise.

It will work when the [SENSITIVITY] is set to [AUTO] or [ ].

VQT2G62 121

Page 121
Image 121
Panasonic DMC-GF1K operating instructions Exposure Intelligent exposure adjustment, Long Shtr NR, ISO Limit SET