
RECORDING MODE
Using the camera button to adjust the camera
The STILL IMAGE/MOVIE CLIP mode function can be set up by using the camera button.
POWER switch
Used for turning the camera power on / off.
If this camera doesn t be operated during the specified time(about 60 SEC.), the camera power will be idle(LCD monitor off, Camera status LED : Green) automatically(p.71). To use the camera again, press the camera buttons except the power switch.
The camera power will be turned off automatically during periods of inactivity. This is done to reduce battery drain. The camera can be reactivated by sliding the power switch again.
SHUTTER button
Used for taking images for RECORDING mode (Still image, Movie clip).
ADVANCED
LCD button
Pressing the LCD button in the RECORDING(STILL IMAGE,
MOVIE CLIP) mode will change the display as shown below.
35