SETTING UP THE CAMERA SYSTEM
POWER OFF
This function switches the camera off after a set amount of time in order to prevent unnecessary battery drainage.
You can set the power to switch off at any specified time( 3, 5, 10, 30MIN) from the last operation.
If you select [CANCEL], the power off function will not operate.
Note that the automatic power off does not operate if the camera is in slide show or PC mode.
Selecting the power off function
Steps 1 to 5 are the same as those for selecting the SETUP mode(p.68).
6.Press the UP(
) /DOWN(
) button and select [POWER OFF].
7.Select the desired auto power off time by pressing the
LEFT( )/ RIGHT(
) button. The default is [3 MIN].
8. Press the Ok button to confirm the setting.
Time for the power off
SETUP 1/3
BEEP
FORMAT
POWER OFF
RESET
3 MIN
ADVANCED
Power status | Period of time ( Battery ) | Period of time ( AC adapter ) |
|
|
|
Idle mode(LCD off) | 60 sec | 60 sec |
|
|
|
Power off | [User setting] | [User setting] |
|
|
|
71
