SOFTWARE MANUAL
INFORMATION
Before connecting the camera to the PC, You should first install the camera driver first.
After installing the camera driver, you have to restart your PC.
If you connect the camera to the PC before installing the camera driver, the [Found New Hardware Wizard] will open. In this case, cancel the [Found New Hardware Wizard] and disconnect the connection. Install the camera driver and connect the camera and PC again. 
Should the computer not find the camera driver after installation, please try one or more of the following measures.
1.Delete the camera driver (p.95), and
2.Refer to FAQ (p.123) to check for a possible solution to the problem.
3.If your PC’s central processing unit is VIA chip(This is shown in the USB Host Controller), download the patch file from the Samsung Camera web page. (http://www.samsungcamera.com)
To view an image that is stored in the camera, install Digimax Viewer (p.102). To edit an image that is downloaded to PC, install PhotoSuite III SE (p.105).
94
