SETTING UP THE CAMERA SYSTEM
RESET
This menu allows you to reset all the camera settings to the default.
DATE/TIME, LANGAGE, VIDEO OUT settings will not be changed by doing the [RESET] menu. After resetting the camera system, check the video output signal of the camera is same as that of the country where you are.
Refer to following for information on the default.
Selecting the default camera setting
Steps 1 to 5 are the same as those for selecting the SETUP mode(p.68).
6. Press the UP(
) /DOWN(
) button and select [RESET].
7. Select [YES] or [NO] by pressing the LEFT( )/ RIGHT(
) button and press the OK button.
[Selecting YES] | : All the camera setting is changed to the |
| camera default setting. |
[Selecting NO] | : SETUP menu will display without the |
| resetting the camera system. |
The default camera setting
SETUP 1/3
BEEP
FORMAT
POWER OFF
RESET
YES NO
Camera setting | Default | Camera setting | Default |
|
|
|
|
Image size | 1280x1024 | Slide show play back time | 3 sec |
|
|
|
|
Quality | Fine | Power off | 3 min |
|
|
|
|
Flash | Auto flash | Beep | ON |
|
|
|
|
LCD brightness | 0 | White balance | Auto |
|
|
|
|
EV compensation | 0.0EV | Quick View | ON |
|
|
|
|
72
