INSTRUCTIONS
Use this camera in the following order.
If your video output signal is PAL type, you have to select [PAL/50Hz] in [VIDEO OUT] menu before taking a picture.(p.77)
Set up
the camera driver
Take a picture
Insert USB cable
Check the camera
power
Check
[Removable Disk]
Before connecting the USB cable to the PC and this camera, you have to set up the camera driver. Install the camera driver that is contained in the Application S/W
Take a picture (p.33 ~ 49)
Insert supplied USB cable into PC USB port and the camera USB connection terminal.
(p.79)
Check the camera power. If the power is turned off, slide the camera switch to power it on.
(p.35)
Open Window’s EXPLORER and search [Removable Disk].
(p.97)
2
