Panasonic DMC-GF1K Taking pictures by specifying the aperture/ shutter speed, REC mode ±´

Advanced (Recording pictures)

Press 2/1 to select [MULTI FILM].

Select either [MULTI FILM 1], [MULTI FILM 2], or [MULTI FILM 3] with 3/4, and then select the film to be set for each with 2/1.

•You can also use the rear dial to set.

•[OFF] can be selected only for [MULTI FILM 3].

Press [MENU/SET] to set.

•You can also press the shutter button halfway to set.

Focus on the subject and take a picture.

•It will continuously take pictures by keeping the shutter button pressed when it is set to burst mode. (Up to 3 pictures)

•When using a self-timer, up to 3 pictures with set film will be taken if the shutter button is

pressed. (It will operate same as [ ] even if it is set to [ ].)

•Multi film indication ([ ]) displayed on the LCD monitor/optional external viewfinder will flash until all pictures of preset amount are taken.

Note

•[STANDARD] is registered in [MULTI FILM 1], [MULTI FILM 2] and [OFF] is registered in [MULTI FILM 3] at the time of purchase.

•White Balance Bracket will be disabled when the Multi Film Bracket is set.

•Motion pictures are recorded with the settings for the [MULTI FILM 1] setting.

[REC] mode: ±´

Taking pictures by specifying the aperture/ shutter speed

[ ] Aperture-priority AE

Set the aperture value to a higher number when you want a sharp focus background. Set the aperture value to a lower number when you want a soft focus background.

Set the mode dial to [].

Rotate the rear dial to set the aperture value.

•It will switch between aperture setting operation and Exposure Compensation operation every time the rear dial is pressed.

•Rotate the rear dial to display the [EXPO.METER]. (P127)

Take a picture.

84 VQT2G62