68
Basic

Taking a Still picture

Set the drive mode dial to [ ] (single).
1Select the Recording Mode. (P84)
2Press the shutter button halfway to focus.
AAperture value
BShutter speed
Aperture value and shutter speed are displayed. (It
will flash in red if the correct exposure is not
achieved, except when set to flash.)
When the image is correctly focused, the picture
will be taken, since the [Focus/Release Priority]
(P55) is set initially to [FOCUS].
¢1 When AF Mode is set to [ ], the first AF area at which focus is achieved may be
displayed momentarily while pressing halfway.
¢2 A beep will be emitted when focus is first achieved during the pressing halfway.
When the brightness is insufficient for [AFF] or [AFC], the camera will operate as if
[AFS] has been set. In this case, the display will change to the yellow [AFS].
3Press the shutter button fully (push it in

further), and take the picture.

Focus Mode AFS
Focus When the subject is
focused
When the subject is not
focused
Focus indication COn Blinks
AF area DGreen —
Sound Beeps 2 times
Focus Mode AFF/AFC
Focus When the subject is
focused
When the subject is not
focused
Focus indication COn Blinks or Off
AF area DGreen¢1
Sound Beeps 2 times¢2
6060602.82.82.8
AB
DC