70
Basic
Just by touching the subject you want as your point of focus, the camera will focus on the
subject and take the picture automatically.
To cancel the Touch Shutter function
Touch [ ].
If shooting with the touch shutter fails, the AF area turns red and disappears. In that case, try
again.
Measurement of brightness is performed on the spot touched when the [Metering Mode] (P162)
is set to [ ]. At the edge of the screen, the metering may be affected by the brightness around
the touched location.

Taking pictures using the Touch Shutter function

1Touch [ ].
2Touch [ ].
Icon will change to [ ], and taking a picture with the
Touch Shutter function becomes possible.
3Touch the subject you wish to focus on, and then take a picture.
The picture is taken when the focus is achieved.
If the histogram is displayed on top of the subject you want to touch, touch the subject
after first moving the histogram by dragging it (P15).
Fn6
Fn7