Panasonic DMC-LZ6, DMC-LZ7 operating instructions 103

Others

2:The display areas on the TV screen and the camera’s LCD monitor are different.

Depending on the TV model, the area display may be smaller so the picture may be stretched horizontally or vertically and the top and bottom or left and right of the picture may be cut off when it is displayed. This is due to the TV specifications and is not a malfunction.

3:The motion pictures cannot be played back on a TV.

•Are you trying to play back the motion pictures by directly inserting the card in the card slot of the TV?

–Connect the camera to the TV with the AV cable (DMC-LZ7)/video cable (DMC-LZ6) (supplied) and then play back the pictures on the camera.

4:The picture is not displayed fully on the TV.

•Set the aspect of the TV on the camera. (P22)

5:The picture cannot be transferred when the camera is connected to a PC.

•Is the camera connected to the PC correctly?

•Is the camera recognized by the PC correctly?

6:The card is not recognized by the PC. (The built-in memory is recognized.)

•Disconnect the USB connection cable. Connect it again while the card is inserted in the camera.

7:The picture cannot be printed when the camera is connected to a printer.

•Does the printer support PictBridge?

–You cannot print pictures with printers which do not support PictBridge. (P88)

•Reset the mode to [ ]. (P88)

8:The ends of the pictures are cut at printing.

•When using a printer with a trimming or borderless printing function, cancel this function before printing. (For details, refer to the operating instructions for the printer.)

•When you order photo studios to print pictures, ask the photo studio if the pictures can be printed with both ends.

∫Others

1:An unreadable language was selected by mistake.

•Press [MENU/SET], select the [SETUP]

menu icon [ ] and then select the [ ] icon to set the desired language. (P22)

2:The setting for the auto review function is disabled.

•Is the camera in burst mode (P66) or motion picture mode [ ] (P53)?

–In these cases, you cannot set the auto review function in the [SETUP] menu.

3:A red lamp sometimes turns on when the shutter button is pressed halfway.

•In dark places, the AF assist lamp (P66) lights red to make it easier to focus on a subject.

4:The AF assist lamp does not turn on.

•Is [AF ASSIST LAMP] on the [REC] mode menu set to [ON]? (P66)

•Are you taking pictures in dark places?

–The AF assist lamp does not turn on in bright places.

•The AF assist lamp does not turn on when [SCENERY] (P47),

[NIGHT SCENERY] (P48) [FIREWORKS] (P51),

[AERIAL PHOTO] (P52) or [SUNSET] (P49) in scene mode is selected.

103

VQT1C39