Advanced (Recording pictures)
•Depending on the brightness and how fast the subject is moving, jitter may not be avoided.
•The camera may not be able to detect the movement of the subject in the following cases.
–When the moving subject is small
–When the moving subject is at the edge of the screen
–When the subject starts moving the instant the shutter button is pressed fully
•To avoid picture noise, we recommend decreasing [ISO LIMIT] or setting [COL.MODE] to [NATURAL]. (P67)
•The following functions cannot be used.
–[SLOW SHUTTER]
–[D.ZOOM]
Taking Close-up
Pictures
This mode allows you to take
∫Focus range
50 cm
(1.64 feet)
T5 cm 
(0.16 feet) 
W
•We recommend using a tripod and the
•When a subject is close to the camera, the effective focus range (depth of field) is significantly narrowed. Therefore, if the distance between the camera and the
subject is changed after focusing on the subject, it may become difficult to focus on it again.
•If the distance between the camera and the subject is beyond the focus range of the camera, the picture may not be properly focused even if the focus indication lights.
•Macro mode gives priority to a subject close to the camera. Therefore, if the distance between the camera and the subject is more than 50 cm (1.64 feet) it
takes longer to focus on it in macro mode than normal picture mode [ 
].
•The available flash range is about 50 cm (1.64 feet) to 5.4 m (17.7 feet) (Wide). (When the ISO sensitivity is set to [AUTO].)
•We recommend setting the flash to
Forced OFF [ 
] when you take pictures at close range.
•When you take pictures at close range, the resolution of the periphery of the picture may decrease slightly. This is not a malfunction.
45
VQT1C39
