Panasonic DMC-LZ6, DMC-LZ7 operating instructions LCD Monitor Display Switching the LCD

Preparation

LCD Monitor Display/

Switching the LCD

Monitor Display

∫Screen display in normal picture mode [] (Initial settings)

1 2 3 4 5 6 7

13				8
	7
			9
		10

F2.8 1/30

12 11

1Recording mode

2Flash mode (P38)

•If you press the shutter button half way when the flash is activated, the flash icon turns red.

3AF area (P24)

•The AF area displayed is bigger than usual when taking pictures in dark places.

4Focus (P24)

5Picture size (P63)

6Quality (P63)

: Jitter alert (P26)

7Battery indication

•The indication turns red and blinks if the remaining battery power is exhausted. (The status indicator blinks when the LCD monitor turns off.)

•Replace with new batteries or fully charged Ni-MH batteries.

•It does not appear when you use the camera with the AC adaptor (DMW-AC6PP; optional) connected.

8Number of recordable pictures (P105)

9Recording state

10Built-in memory/Card

•The access indication lights red when pictures are being recorded on the built-in memory (or the card).

–When using the built-in memory

–When using the card

•Do not do the following when the access indication lamps lights. The card or the data on the card may be damaged and this unit may no longer operate normally.

–Turn the camera off.

–Remove the batteries or the card (if used).

–Shake or bump this unit.

–Disconnect the AC adaptor (DMW-AC6PP; optional). (when using the AC adaptor)

•Do not do the above when pictures are being read or deleted or the built-in memory (or the card) is being formatted (P84).

•The access time for the built-in memory may be longer than the access time for a card. (Max. about 7 sec.)

11Shutter speed (P24)

12Aperture value (P24)

•If the exposure is not adequate, the aperture value and the shutter speed turn red. (They do not turn red when the flash is activated.)

13Optical image stabilizer (P65)

•Refer to P93 for information about other screen displays.

∫Switching the screen display You can change the screen display by pressing [DISPLAY]. This allows you to display information while taking pictures such as the picture size or the number of recordable pictures or take pictures without displaying any information. Refer to P35 for details.

23

VQT1C39