Panasonic DMC-LZ6, DMC-LZ7 Message Display, This Memory Card is Locked, No Valid Picture to Play

Models: DMC-LZ6 DMC-LZ7

1 120
Download 120 pages 46.5 Kb
Page 97
Image 97

Others

Do not allow battery terminals to come into contact with metal objects (such as necklaces, hairpins, etc.).

This can cause short circuiting or heat generation and you may be badly burned if you touch the batteries.

Card

Do not leave the card where the temperature is high, where electromagnetic waves or static electricity are easily generated or exposed to direct sunlight.

Do not bend or drop the card.

The card may be damaged or the recorded content may be damaged or deleted.

Put the card in the card case or the storage bag after use and when storing or carrying the card.

Do not allow dirt, dust or water to get into the terminals on the back of the card and do not touch the terminals with your fingers.

When not using the camera for a long period of time

Store the batteries in a cool and dry place with a relatively stable temperature. [Recommended temperature:

15 oC to 25 oC (59 oF to 77 oF), Recommended humidity: 40% to 60%]

Always remove the batteries and the card from the camera.

If the batteries are left inserted in the camera they will discharge as a weak electric current passes through them even if the camera is turned off. (Read P12 for information about Ni-MH (nickel metal hydride) batteries.)

We recommend storing the camera with a desiccant (silica gel) when you keep it in a closet or a cabinet.

Message Display

Confirmation messages or error messages will be displayed on the screen in some cases. The major messages are described below as examples.

[CURRENT BATTERY TYPE SETTING: OXYRIDE]/[CURRENT BATTERY TYPE SETTING: ALKALINE/Ni-MH]

This message is displayed the first time you insert batteries and when the batteries are exhausted and you replace them. If the battery type being used is different from the one indicated in the message, change the battery type in [BATTERY TYPE] in the [SETUP] menu. (P20)

[THIS MEMORY CARD IS LOCKED]

The Write-Protect switch on the SD Memory Card and the SDHC Memory Card are moved to [LOCK]. Move the switch back to unlock it. (P16, 80, 84)

[NO VALID PICTURE TO PLAY]

Record a picture or insert a card with a recorded picture and then play it.

[THIS PICTURE IS PROTECTED]

Delete or overwrite the picture after canceling the protect setting. (P80)

[THIS PICTURE CANNOT BE DELETED]/ [SOME PICTURES CANNOT BE DELETED]

Pictures not based on the DCF standard cannot be deleted. If you want to delete some pictures, format the card after saving necessary data on a PC etc. (P84)

[NO ADDITIONAL DELETE SELECTIONS CAN BE MADE]

You have exceeded the number of pictures that can be set at one time with [MULTI] in [DATE STAMP] or [MULTI DELETE].

Delete the set pictures or imprint the date information on them and then do the operation again for any remaining pictures. More than 999 favorites have been set.

97

VQT1C39

Page 97
Image 97
Panasonic DMC-LZ6 Message Display, This Memory Card is Locked, No Valid Picture to Play, This Picture is Protected